DelphiniaLaw251
Garage door repair may often be made by the homeowner themselves. There are at least 5 simple things to check, before calling an expert. Some repairs are extremely easy. For example, a stiff or perhaps a squeaky door will merely require a good cleaning and lubrication. Other repairs, for example repairing a torsion spring, are incredibly dangerous and wish the aid of an expert.
Before proceeding to the repair, make sure to unplug your garage door opener, so that you do not get an electrical shock while you are repairing your garage door. You will most likely be sitting on a ladder, which is a horrible place to have an electric shock, because you can also disappear the ladder. Also, remember to wear safety glasses whenever using power tools.
This is a list of items to check before with a professional for your garage door repair:
1. Check the Metal Tracks for Damages
This easy garage door repair tip may often solve the issue very fast. The metal tracks often might have dents or bumps. If you discover any such damages, strike the damaged area of the track with a wood block along with a hammer to straighten the track.
2. Look into the Alignment of the Tracks
If the tracks aren't aligned well, they may be resulting in the door to not work. It's not always necessary to unscrew the tracks; you can easily attempt to loosen the bolts or screws and to tap the tracks slightly in place. Make use of a level to determine the alignment from the tracks. Aligned tracks will let you be done together with your garage door repair in no time.
3. Dry and clean the Tracks
Though it may sound obvious, but hardened dirt and old lubricant could be the cause of the garage door sticking. In this case, your garage door repair may consist of merely cleaning the tracks and then drying them. You should use regular cleaners to clean the tracks.
4. Lubricate the Tracks and the Rollers
Merely lubricating both, the tracks and the rollers, can deal with the problem and conclude your garage door repair very quickly. For lubrication, you may use lubrication spray or perhaps a silicon spray. It is probably better to lubricate the tracks after cleaning them. Actually, any movable part will benefit from lubrication.
5. Tightening the Loose Bolts and Screws
Bolts and screws tend to become loose with time. Try to check all the screws and bolts active in the opening/closing mechanism of your door. Sometimes, merely tightening them may solve the whole problem. If you cannot tighten the screws, since the holes themselves have grown to be loose, then you can use a "wood filler" or pieces of normal wood to fill the holes.
What Not to complete?
If you have tried each of the above solutions, and none of them have worked, the issue could be the door spring. However, it is advised to not perform your garage door repair if the problem appears to be the spring, particularly if it's a torsion spring. Unfortunately, there have been numerous cases, where individuals have gotten injured or even killed through the garage door springs. Probably the most common injuries is a hit in the head, leading to serious trauma towards the brain.